Trang chủ
Sản phẩm
Giới thiệu
Tin tức
Công trình
Liên hệ 
LPI SGT50-25, SGT50-25, chống sét LPI, cắt lọc sét nguồn điện LPI
Thiết bị cắt lọc sét nguồn điện 1 pha không phụ thuộc dòng tải, dòng sét 50kA, lắp song song với CB, aptomat
Xuất xứ: Úc
Hãng: LPI
o Technical Data Sheet: LPI SGT50-25
o Encapsulated Spark Gap technology with low follow current
o Lightning impulse current 50kA, 10/350μs
o 35mm DIN rail mount
LPI® Surge Protection: LPI SGT50-25
· Product Description
The LPI SGT50-25 is a high performance encapsulated spark gap offering a high surge rating with low follow on current,
ideal for point of entry protection. The LPI SGT50-25 is intended for installation within the lightning protection zone
concept at the boundaries LPZ O A(B) -1 according to IEC 1312-1.
The LPI SGT50-25 has been designed for the protection of Phase to Neutral, Phase to Earth, or Phase to Neutral-Earth
protection in LV supply systems.
Follow on current performance of these devices is kept within acceptable levels by the rapid extinguishment of the arc
allowing transients to be clamped without activating upstream protection devices.
· Technical Data
| Ordering code: |
| LPI SGT50-25 |
| Arrester class acc. To IEC 61643-1:1998 and EN 61643-11:2002: |
|
|
| Nominal voltage: | UN | 230V/50Hz |
| Max. continuous operating voltage: | UC | 255V/50Hz |
| Follow current extinguishing capability at U c: | If | 25kArms |
| Lightning impulse sparkover voltage 1.2/50μs: | UP | <1.3kV |
| Max. lightning current Iimp (10/350): | Iimp | 50kA |
| Response time: | tA | <100ns |
| Max Backup fuse: |
| 315AgL/gG parallel connection |
| Short circuit withstand capability at max. backup fuse: | Ip | 80kArms |
| Operating temperature range: |
| -40 to +80˚C |
| Recommended cross-section of connected conductors: |
| 50mm2 (solid) or 35mm2 (flexible) |
| Protection type: |
| IP20 |
| Mounting: |
| DIN rail 35mm |
| Housing material: |
| SLOVAMID 6FRC2 |
| Warranty: |
| 5 Years |
