MC125BNPE5096863, 5096 86 3, Lightning current arrestor MC 1-pole NPE, 255V for TN-S and TT networks, OBO-Bettermann

MC125BNPE5096863, 5096 86 3, Lightning current arrestor MC 1-pole NPE, 255V for TN-S and TT networks, OBO-Bettermann, Long Triết

MC125BNPE: For use in TN-S and TT systems as N-PE discharge gap, Type 1 (Class B)IEC 61643, for interface 0 to 1 (LPZ) according to lightning protection zone concept to IEC61312-1 and/or DIN V VDE V 0185 Part 4 for use as discharge gap between N and PE.

• VDE test mark

• Conforms to VDN Directive, 2nd Edition 2004

• Protection capability 125 kA 10/350 μs

• Including plug caps for identifying the connections

• Protection level <2.5 kV

• Enclosed, non-extinguishing discharge gap: can be used in normal commercial distributorhousingsApplication example: lightning arrestor in accordance with VDN Directive for pre-meter area.Note: required as de-coupling length for overvoltage protection of 5 m of cable.

 

Download tài liệu MC125BNPE

 

 

MC125BNPE
Article number			5096 86 3
Nominal voltage	U­N	V	230
SPD to EN 61643-11			Type 1
SPD to IEC 61643-11			Class 1
Lightning protection Zone LPZ			0→1
Impulse discharge current (10/350)	I­imp	kA	50
Total discharge current (10/350)	I­Total 10/350	kA	125
Nominal discharge current (8/20)	I­n	kA	50
Arrestor surge current (8/20) [total]	I­Total 8/20	kA	125
Voltage protection level	Up	kV	<2,5
Response time	tA	ns	<100
Follow current interrupt rating (eff) [N-PE]	I­fi	kA	0,1
Maximum back-up fuse		A	-
Temperature range	ϑ	°C	-40 - +85
Division unit TE (17.5 mm)			2
Protection rating			IP20
Connection cross-section, rigid		mm²	10 - 50
Connection cross-section, multi-wire		mm²	10 - 35
Connection cross-section, flexible		mm²	10 - 25