VGBCDCPH9004K, 5088 63 2, 5088632, tủ chống sét, tủ cắt lọc sét nguồn điện, tủ cắt lọc sét hệ thống pin mặt trời

VGBCDCPH9004K, 5088 63 2, 5088632, tủ chống sét, tủ cắt lọc sét nguồn điện, tủ cắt lọc sét hệ thống pin mặt trời, Long Triết

PV system solution with connection terminals

PV system solution with connection terminals, type 1+2, 900 V DC,incl. V-Tec entry set

System solution for photovoltaic inverter with 1 MPP tracker

• Varistor arrester, connectable with cut-off unit in error-resistant Y circuit to VDE 0100-712(50539-12)

• Low DC protection level: < 2.6 kV (Voc max = 600 V DC with V50BC0300PV / V20C0300PV)

• Low DC protection level: < 3.0 kV (Voc max = 900 V DC with V25BC0450PV)

• Low DC protection level: < 4.0 kV (Voc max = 1000 V DC with V20C0500PV)

• For each protection device, there are 10 terminals up to 6 mm² pre-mounted in the housing,up to 30 A DC per terminal

• Pre-mounted in polycarbonate housing (IP65), UV-resistant for use outside, including cablegland kit

For DC protection of the inverter in photovoltaic systems.

If there is a danger of condensation forming through wind, ice, temperature or sunlight, furthermeasures may be necessary!

Download tài liệu VGBCDCPH9004K

VGCDCTS1000
Article number			5088 63 2
U max DC	Uc DC	V	1000
SPD to EN 61643-11			Type 1+2
Lightning protection zone LPZ			0→2
Impulse discharge current (10/350)	Iimp	kA	7
Nominal discharge current (8/20)	In	kA	30
Maximum discharge current (8/20 μs)	Imax	kA	50
Voltage protection level	Up	kV	<3,0
Response time		ns	<25
Connection cross-section String			0.5 - 6 mm²
Anschlussquerschnitt PE			0.5 - 6 mm²
Temperature range	ϑ	°C	-40 - +80
Protection rating			IP65